Specifications

Material: ABS, Iron, Aluminum, Alloy Steel, HDR

Surface Treatment: Spray-paint, Blackening

Color: Black, Red, Grey

Power Source: ‎Gas Powered

Starter System: Hand Pull Start

Engine Type: Two-stroke, Air Cooling, Single-cylinder

Number of Items: 1

Power: 1900W

Noise: ≤103DBA

Displacement: 52cc

Max. Torque: 3.5N.m

Gasoline Type: #92

Impact Energy: 25-45J

Fuel Tank Capacity: 1L/0.26gal

Impact Frequency: 800-2800BPM

Fuel Consumption Rate: ≤0.5L/h

Maximum Rotational Speed: 6500RPM

Fuel Type: Mixed Oil (25 Gasoline: 1 2-stroke Engine Oil)

Gross Weight: 22.7kg/50lbs

Net Weight: 20.95kg/46.18lbs

Equipped Socket Size: 55mm/2.17in(Small), 70mm/2.76in(Big)

Product Size: 80*35*25cm/31.5*13.78*9.84in

Package Size: 73*44*35cm/28.74*17.32*13.78in

Package Included

1*Petrol Post Driver

2*Post Driving Heads

1*Oil-mixing Kettle

1*Tools Kit

1*Funnel

1*Filter Nozzle

1*English Manual

All Accessories for Assembly

Notes

1.Please read the manual carefully and strictly follow the precautions for a better experience.

2.If this product does not hammer, please check if too much lubricating oil has been added. Clean the excess oil in the cylinder and add about 20 grams of high-temperature resistant lubricating oil again.

3.If the impact frequency is too high to hold by and, it is recommended to slightly reduce the speed of the carburetor. Otherwise, please increase the impact frequency.

4.If the machine is not easy to start, first check the ratio of oil: gasoline: oil=25:1 (please note to use 2-stroke oil), then pull out the rope for arm's length and continue pulling it two or three times to start. When the machine starts cold, please close the baffle and wait for the machine to function properly before opening it.

5.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.