Product Details
Name:Pneumatic Grinding Machine
Chuck size:6mm
Speed:18000R.P.M
Air consumption:170l/min
Air inlet:1/4
Air inlet pipe:3/8
Air pressure:6-8kg
Net weight:0.64kg
Total length:170mm

Product Description
1. Two special wrenches are used together to clamp the chuck seat and chuck nut respectively, make the chuck open, choose the suitable grinding head to be loaded into the chuck, and use the special wrench to lock the grinding head.
2. Connect the air hose to the air inlet of the air mill;
3. Hold the air grinder with your right hand and press the trigger positioning piece and trigger with your thumb, the air grinder will start to work, then slowly approach the surface to be sanded and start to work.
Attention
1. Add a small amount of lubricant before work to ensure that the tool plays a better effect.
2. Please wear a mask when operating.
3. Check and make sure the grinding head is tightened before use;
4. Check the working pressure during use;
5. Close the air valve after use and place it properly to avoid injury caused by accidental startup.
6. find abnormalities, please overhaul in a timely manner.
7. Tools should be maintained regularly.