Spec:
Item Type: Pneumatic Sander
Material: Aluminum Alloy
Non Load Speed: 12000rpm
Air Consumption: 0.34m³/min
Chassis Thread Interface: M8
Chassis Diameter: Approx. 125mm / 4.92in (There is a ±2mm error in manual measurement)
Use Scenarios: for Car Beauty, Wood Polishing, Removal, Sheet Metal Polishing

Package List：
1 x Pneumatic Grinder
1 x Base
1 x Special Wrench

Note：All data are measured manually and there is some error in the measurements.Monitors are calibrated differently, the colours shown in the photos may be slightly different from the real thing. Please refer to the real object.
1. Wash and dry compressed air is necessary. Please remove the oil and from the air compressor.
2. Method of removing oil and water from air compressor: Accuracy filter can be installed
3. The appropriate air pressure is 6‑8kg/cm. If the air pressure is too high, will shorten the service life and cause malfunctions.
4.Please note that the plush tray color of this product will be sent randomly, please make sure you don't mind before ordering.