ECCPP 2PCS 6 Lug Wheel Spacers 6x5.5 to 6x5.5 3" inch fit for 1999-2018 for Chevrolet Silverado 1500 2000-2013 for Suburban 1500 1995-2014 for Chevrolet Tahoe
Compatibility List Included : Fit for 1999-2014 for Sierra 1500 2000-2013 for Yukon 2000-2014 for Yukon XL 1500 Wheel Spacers
Installation with Confidence : Wheel Spacers 6 lug Thickness 2",Vehicle bolt pattern 6x5.5/6x139.7mm Wheel bolt pattern 6x5.5/6x139.7mm Thread 14mmx1.5 bore size 108mm;Wheel Spacers Designed: For Heavy Duty Trucks Material: Forged 6061 T-6 Aircraft Aluminum Full Set of 32 Machined Pressed in Studs Opened End Lug Nuts This Kit Comes with Everything You Need for Installation(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
Excellent Driving Experience : 6x5.5 WHEEL SPACERS 3 inch provide your car with an aggressive appearance while adding safety and stability to your car. It can effectively increase the wheelbase of the car, balance the center of gravity of the body, reduce body deformation, and solve the problems of drifting and tilting when the car is driving at high speeds and cornering at high speeds
Little Change Huge Difference : These 3 inch WHEEL SPACERS 6 LUG make your vehicle have a more aggressive stance by giving it a slightly wider stance. And you can enjoy off-roading! Because tire spacers give your car better grip, more acceleration and better handling. And through mounting tire spacers give you more flexibility, because they allow for large brake caliper installations or lift/lowering kits
Check before You Purchasing : wheel adapter spacers 6x139.7 Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 14x1.5mm threads; 2) You have more than 3 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 3 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 108mm