Search

Search

Transmission Fluid Fill Adapter 5R55W Compatible with Explorer 2002-2010 Mustang 2005-2010 Thunderbird 2003-2005

KWD 3.500
Brand
Cunyuer
Category
Oils & Fluids
Weight
14 g
– 1 +

Special Features

  • Adapt to 5R55W Automatic Transmission: The adapter tool is specifically designed for filling or adding oil to the 5R55W automatic transmission, which can easily replace old or damaged refueling adapters and install them directly
  • Compatibility: Compatible with Ford Explorer 2002-2010, Ford Explorer Sport TRAC 2007-2010, Ford MUSHANG 2005-2010, Ford THUNDERBRRD 2003-2005
  • Material: Made of high-quality metal, with good wear resistance and stability. The size is approximately 1.1 x 3.2 centimeters/0.43 x 1.26 inches. Please confirm compatibility before purchasing
  • Usage: 1. Drive the vehicle until the transmission reaches operating temperature and ensure it is level. 2. When parking and idling the engine, remove the oil level check plug from the middle of the chassis. 3. There are two plugs, one inside the other. The oil check plug is located at the center of the 3/16 inch hex wrench. Attention: When full of oil, the oil should drip out from the hole. 4. Remove the internal fuel plug from above. Use a wrench to clamp the outer nut to prevent all liquid from draining
  • Usage: 5. Install the transmission fluid filling connector.6. Enter the transmission to the correct liquid level to add liquid in small increments, and keep checking until the liquid drips slowly.7. Remove the gearbox oil filling adapter.8. There will be some leakage, this is normal, you should let this happen in order to reach the appropriate level

Description

Specification
Condition: Brand New
Item Type: Transmission Fluid Fill Adapter
Material: Metal
Application: Used in 5R55W automobile gearbox
Size: Approx. 1.1 x 3.2cm / 0.43 x 1.26in

Fitment:
Fit for EXPLORER 2002-2010
Fit for EXPLORER SPORT TRAC 2007-2010
Fit for MUSTANG 2005-2010
Fit for 2003-2005

How to use this transmission fluid to fill the adapter:
1. Drive the vehicle until the transmission is at operating temperature and make sure it is level.
5. Install the transmission fluid filling connector.
6. Enter the transmission to the correct liquid level to add liquid in small increments, and keep checking until the liquid drips slowly.
7. Remove the gearbox oil filling adapter.
8. There will be some leakage, this is normal, you should let this happen in order to reach the appropriate level.

Package List
1 x Transmission Fluid Fill Adapter

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}