DASBET 8PCS Petrol Engine Cylinder Compression Tester Kit

Features:

There are 4 sizes of brass adapters and 2pcs universal push-on connectors in the engine pressure tester kit. The 10mm 12mm 14mm 18mm adapters can be connected to the corresponding size cylinder head. The straight push-on connector and the curved one use rubber cone tip, can be pushed against on the cylinder head, universal for almost all the size cylinder head.
A professional tool to test the compression in gasoline engine, a perfect kit which includes everything you need for a fast & effective compression pressure testing of petrol, gas, and fuel engine cylinders for most spark plug types on cars, trucks, motorcycles, marines, ATVs, UTVs, snowmobiles, boats, & more.
The engine cylinder compression test tool kit can be widely used for most type and depth spark plug well. If you have motorcycle car truck ATV mower and any other vehicles with gasoline or gas engine, and you are a professional on repairing vehicles, you can try this kit. Please note, this cylinder compression test gauge is not suitable for most diesel engine, because the range of the gauge is only 0-300PSI, which is much lower than most diesel engine compression.

Specifications:

Dual Range Gauge:0-21bar/0-300psi
Four Fittings:M10*1.00MM; M12*1.25MM;M14*1.25MM; M18*1.50MM

Package List:

1 x 300PSI / 20bar pressure gauge with quick coupler
1 x 6"" long straight push-on connector
1 x 6"" long curved push-on connector
1 x 14"" Extension hose
4 x Brass adapters: M10, M12, M14, M18
1 x Instruction
1 x Red storage case

Step to Use:

1.Run the engine to the normal operating temperature. Stop the engine, unload spark plug wires. Clean all spark plug wells if necessary.
2.Remove the spark plugs and the air filter, set the throttle wide open position. Disconnect the ignition system. Press the compres