Product material: ABS
Product size: Approx. 110 x 100 x 50mm/4.33 x 3.94 x 1.97in
Power cord length: 1.5m / 4.92ft
Voltage: DC 24V
Power: 24V - 25W
Inlet and outlet diameter: 20mm / 0.79in
High lift: 3-5m / 9.84-16.4ft
rate: 1000-1200L/h
Package List:
1 x Water Pump
1 x Mesh Cover
1 x 13mm Water Nozzle
1 x 19mm Water Nozzle
1 x Base
3 x Suction Cups
Note:
1: Before using the water pump, users must first check whether the rated voltage indicated on the nameplate on the pump matches the actual operating voltage.
2: This water pump can only be used in fresh water or seawater, and cannot be used in other highly corrosive liquids.
3: Do not operate this pump in water above 36°C (99°F) or below freezing point, as it may cause damage to the pump.
4: Do not let the water pump run dry or idle for a long time to avoid damaging the pump body.
5: The power cord of the water pump cannot be replaced. If any damage is found to the power cord during use, the pump must be stopped.
6: When installing, removing, and cleaning the water pump, it is necessary to first unplug the power plug and cut off the power to ensure safety.
7: A single pump cannot be used independently, nor can it run without water.