A must have for hemming Items

3 Pieces Professional Sewing Machine Wide Rolled Hem Foot and 3 Pieces Narrow Hemmer Foot ,2 Pieces Stainless Steel Hemming Clips Set
-- Suitable for most of household low shank snap-on sewing machines.Widely used in clothes and other projects with lightweight fabric.
--Can easily be selvedge sewing with three folding way, applicable to all kinds of fabrics, flat seaming curling, snap to 3 for wrapping just like snapping paper.
--Suitable for sewing thin fabrics curling. Beautiful and practical, used to assist in the completion of professional effects of curling.
--The edge of the fabric can be rolled up with a small three fold and stitched with a central straight stitch.
--Excellent grip keeps the fabric's hem in control allowing the sewing process to beneat and aligned

Specification:
Material: Stainless Steel
Color: Silver

Wide Rolled Hem Foot Set Include:
4/8" hemmer foot (13mm wide rolled hems)
6/8" hemmer foot (19mm wide rolled hems)
8/8" hemmer foot (25mm wide rolled hems)
Narrow Hemmer Foot Set Size (LW): approx. 4.8 x 4.3 cm/ 1.89 x 1.69 inch
Sewing Clips:4inch (115 mm). Measures hems professionally up to 3 inches wide without any crook

Narrow Hem Foot Set:
How to use:
1.Turn the cloth upside down and place it under the foot;
2.Lower the machine needle to a position 1/8 inch (about 3mm) away from the edge of the cloth, and then sew 2-3 needles first;
3.Lift the presser foot and the machine needle;
4.Pull the fabric back and forth to make it pass through the roll groove at the front of the presser foot;
5.Please make sure that the fabric edge is under the machine needle, and then put down the presser lever;
6.Sew 2-3 stitches at a slow speed to ensure that the cloth is sent to the roll groove at the front of the presser foot;
7.Continue sewing until the hem is finished.

Installation steps of the presser foot:
1. Rotate the hand wheel forward, lift the needle to the highest position, and raise the presser foot.
2. Press the wrench on the presser foot bracket at the back, and loosen the presser foot.
3. Install the presser foot so that the pin of the presser foot plate is just facing the groove of the presser foot handle, put down the presser foot plate hand, and the presser foot will be fixed in its position.

Package Including:
3 x Narrow Rolled Hem Presser Foot
3 x Wide Rolled Hem Presser Foot
2 x Sewing Clips