Search

Search

Diamond Tester Pen, Jewelry Diamond Tester, Diamond Selector for Novice and Expert, Thermal Conductivity Meter

KWD 6
– 1 +

Special Features

  • [Steps of Usage]: Remove the cap from the testing pen>>Insert the battery we attached >> Turn on the diamond tester pen and wait until both the lambs OK >>Place the pointer vertically on the surface of the stone >>Observe the indicator lights and listen to the sound>> get the result
  • [INITIALIZATION SETUP] We have to finish the initialization setup by the following 2 steps: 1st we have to check the detailed room temperature and diamond size,find the Initial value of our test.you can find the detailed table on the back of the diamond tester pen. 2nd we have to turn the wheel to set the Initial value.eg if the size of diamond is small than 0.05ct, and the temperature is more than 30 degrees Celsius,then set the Initial value as 7, it means you have to turn the weel and keep 7 lights on. Otherwise you won't get a acuracy result.
  • [FOR DIAMOND]:For testing diamond(include real diamond and Moissanite), it will emits beeping-beeping-beeping in a low frequency, 1 time/second. Meanwhile lights ≥ 9 (Notice: the bigger the stone is, the more lights on)
  • [CAN'T DISTINGUISH MOISSANITE]: This diamond testing pen is just a entry-level pen for amateur. So it can only help you distinguish between diamonds and imitation gemstones, but it cannot distinguish between natural diamonds and laboratory-grown diamonds (Also Called Moissanite).
  • [TWO HANDS OPERATION] All test must be done by TWO hands, one for hold the diamond and one for the diamond tester. As for the hand which hold diamond tester, you have to touch the electricity conductive panel on the back of the unit.If you test the diamond just by one hand, you will get a wrong result
  • [CAN'T TEST METAL]: Please never use this diamond testing pen test metal!

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}