BLACK RTV SILICONE GASKET MAKER
HIGH-TEMP/LOW VOLATILE
Makes gasket for high temperature applications up to 590℉(260℃) safe for oxygen sensor equipped vehicles. Excellent heat control and torque retention for overhead cam and timing chain covers.Dries tough, flexible and improves high temperature performance. Resists most engine fluids.
DIRECTIONS:
1. Clean all surface thoroughly. Remove old gaskets and prepare flapge surfaces. Dry and remove all oil and grease.
2. Remove cap puncture inner seal, screw on nozzle and cut to desire size.
3. Apply continuous, uniform 1/16” to 1/18” bead around perimeter of one surface. Completelysurround all holes of bolt.
4. Wait 20 minutes for silicone to "skin over". Reassemble parts.
5. Silicone dries in 1 hour and fully cures in 24 hours.
CAUTION: ON DIRECT CONTACT UNCURED SEALANT CAUSES IRRITATION. Avoid contact with eyes and skin. IN CASE CONTACT, flush eyes with water.call physician, Avoid prolonged skin contact.