MCC-P DJI Ronin-S for Panasonic camera shutter release cable

1) Supported control functions: Half-press focus, press to take a photo, start/stop recording (the camera needs to be adjusted to the recording mode)
2) Applicable camera models;
GH2,GH3,GH4,GH5,GH5S,GH6,GH7,S1,S1H,S1R,S5,S5II,s5m2xs,G9,G95 G90,G99,G85,GX7,GX8,GXL,DMC-FZ(20/20K/20S/30/30K /30S/50/50K/50S/100/150/200/1000/2000),G1,G2,G3,G5 G6,G7,G10,GF1
3) When adjusting the for Panasonic camera to the video mode, hold down the DJI red button for 2 seconds to control the video
4) This connection cable is a shutter release connection cable, and its function is the same as the shutter release button on the camera.
5)for Panasonic camera shutter release port remote- for most camera models, it is located above the SD card at the same position
6) If it cannot be operated, please rotate the camera's plug to check if it is not inserted into the bottom properly
7) Usage of the red button on the DJI stabilizer: 01- Half-press without releasing your hand to focus the camera. Press it down and hold for 2 seconds, then take a photo with the camera. 03- Adjust the camera to the video mode, press it all the way down, and the recording will start.