Fitment:
- Compatible with Jeep Wrangler 2018 2019 2020 2021 2022 2023 JL JLU & 2020 2021 2022 2023 Gladiator JT

Features:
- American Flag Style
- High Quality Vinyl
- 3 Layers Structure
- Exterior Accessories for Jeep Wrangler JL

Installation Guide:
1. Clean the side fender vent with either rubbing alcohol or soap and water. Avoid wiping with a cloth or paper towel.
3. Use a spray bottle with water to wet the installation position so you can adjust the decal (MUST-DO).
4. Remove the white paper backing. If the white paper sticks to the sticker decal, replace the white paper carefully. Use the credit card to remove any air bubbles.
5. Slowly and carefully place the decal around the side fender vent. Use the credit card or other object to rub over the transfer tape to securely adhere the decal to the vent. Begin in 1 corner and slowly work your way across the entire decal with the credit card.
6. Leave the decal on with the transfer tape still attached. This helps ensure that the decal sticks fully to the vent.
7. Remove the transfer tape when the water dries up. Carefully lift up 1 corner of the clear transfer tape. Slowly remove the tape, making sure to peel it at an angle from the corner. Use gentle pressure so you don't remove the decal.

Note:
- The decals are rolled up. Laying the decals flat with some books on top for 7-8 hours before applying help to make the installation easier
- Make sure all flag decal(especially the 3 strips) leave on the clear transfer tape when peeling the white paper backing
- Wait until the all installation finish before driving

Package Included:
- 2 x JL side fender decals