Zinweyton Starlink SPX Plug to RJ45 Adapters, Starlink Cable RJ45 Female Connectors for Starlink Gen 2 Dish and Router Starlink Accessories Zinweyton Starlink - RJ45 to RJ45 Cable Adapter Specification: Item type: for Starlink SPX female to RJ45 adapter. Packing List: 2 x for Starlink Adapter SPX female to RJ45 Material: rubber, copper Specifications: RJ45 Baud rate: 1200mbps (Kpbs) Package Dimensions : ‎ 9.96 x 7.56 x 1.18 inches; 2.4 ounces How to use: Directly plugged in and ready to use. Notice: 1. high contact resistance may cause voltage drop in the circuit, resulting in abnormal Starlink operation. It is recommended to use a single Cat6 or higher Ethernet cable without couplers or extension cables, ensuring that the length does not exceed 175 feet when used with the Gen 2 Genuine Router. For homemade crimped Ethernet cables, ensure that the excellent RJ45 connector is securely attached to the cable. Make sure the waterproof plug is installed properly and does not break or tear the end of the cable. 2. Special tips for RVers: In scenarios that require a third party PoE injector and Ethernet cable coupler/extender, due to the unstable output power of the third party PoE injector and excessive contact resistance may cause voltage drop, opt for Cat6A or better cables with 23AWG or better and high quality RJ45 ends for reliable connection, make sure the length of the regular Ethernet cable should NOT exceed 75 feet between the dish and your PoE device.