innomaker GS Camera OV7251 Sensor with Global Shutter External Trigger Stream Mode 0.3MP Frame Rate up tp 158fps 8bit 10bit rawdata Format for Raspberry Pi 5 4B 3B+ 3B 3A+ CM3+ CM3 Pi Zero W
All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
CAM-MIPIOV9281 is an Industrial Camera Module for Raspberry Pi 4/3B+/3B/CM4/CM3+. Fully V4L2 ( Video4Linux) compatible device. Support libcamera on Bullseye system.
On-board OmniVision OV9281 Monochrome(Black&White) global shutter CMOS Sensor, 1M Pixel. Output RAW8/RAW10 choosable. Support from 640x400@253fps to 1280x800@144fps.
Support for external trigger mode, LED and flash strobe mode and gain programmable. Uses the technique of optical coupling isolation TLP281.
Match a wide angle fisheye Lens. Fov(D)=148 degrees, Fov(H)=118 degrees. Focal distance is adjustable.
Comes with user manual, test demo and friendly technology support. We offer custom design service.
Description
Description:
CAM-MIPI296RAW is a Global Shutter Camera with IMX296LLR-C CMOS Sensor Module support up to 60fps at 1456×1088 Pixels operate with shorter exposure times down to 30µs, given enough light than a rolling shutter camera, which makes it useful for high-speed photography.
--Support Raspberry Pi OS Build In Drivers totally compatible raspberry pi official gs camera module with libcamera tools for all pi boards
--Support Innomaker driver with isolated hardware External Trigger And isolated Strobe function, control by v4l2-ctl -l tools.(InnoMaker Driver did not support libcamera and only support specify system version)
Module Features:
--Support up to 60fps at 1456×1088 Pixels,Compatible with rasberry pi GS camera;
--Comes with 1x M12 Len-seat and 1xCS Len-Seat, 1x M12 wide angle Len;
--Support Pi 4B/Pi 3B+/Pi 3B/Pi 3A+/CM4/CM3+/CM3 Directly with libcamera tools;
--Output format Y10 with Resolution 1456*1088 up to 60fps (InnoMaker Driver);
--Output format YUV with Resolution 1456*1088 up to 60fps;(Raspberry PI OS Driver);