• Uninterruptible Power Supply (UPS) Module for Raspberry Pi/Jetson Nano Supports Charging and Power Output at The Same Time 3S & 5V 5A Output KWD 13
• 2-Channel Isolated CAN Bus Expansion HAT for Raspberry Pi 5/4B/3B/2B/Zero/Zero W/Zero WH/Jetson Nano 2-CH CAN HAT+ Stackable Design for Expanding Multiple CAN Channel KWD 12
• WM8960 Audio HAT Module for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Hi-Fi Sound Card HAT Stereo CODEC Playing and Recording I2S Interfac Stereo 3D Surrounding KWD 11
• PoE HAT (H) for Raspberry Pi 5 / CM 5 | 5V 5A Power Over Ethernet | IEEE 802.3af/at Compliant | Isolated SMPS | Compatible with Official Case & Cooler KWD 13
• 7.5inch E-Ink Display HAT for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH and Jetson Nano no/Ard/Nucleo 800x480 Pixel Black White Two-Color SPI Interface E-Paper Screen LCD KWD 26
• 2.7inch E-Ink Display HAT for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH and Jetson Nano 264x176 Pixel Black White Two-Color 3.3V/5V E-Paper Screen LCD SPI Interface Support Partial Refresh KWD 9.500
• for Raspberry Pi RS485 CAN HAT (B) Isolated 2-Ch RS485 1-Ch CAN SPI Communication On-Board SC16IS752 and SP3485 Chips with MCP2515 Controller CAN Transceiver Multiple Protections KWD 10.500
• PoE M.2 E Key HAT+ for Raspberry Pi 5, PCIe to M.2 E Key Adapter with PoE, Supports NGFF (M.2 E Key) Wireless NIC, USB Bluetooth, SMA Antenna, 16-Pin PCIe & 40-Pin GPIO, 5V/12V Output KWD 13.500
• 10pcs MG-90S 12g Metal Gear Micro Servo Upgraded SG90 Digital Micro Servos for RC Airplane Model Car Helicopter Robot Diving Equipment Racing Model KWD 12.500
• 2pcs MG-90 12g Metal Gear Micro Servo Upgraded SG90 Digital Micro Servos for RC Airplane Model Car Helicopter Robot Diving Equipment Racing Model KWD 5.500
• BME688 Environmental Sensor for Raspberry Pi/Raspberry Pi Pico/Arduino/ESP32, Supports Temperature/Humidity/Barometric Pressure/VOC Gas Detection/AI Function, I2C and SPI with AI Function KWD 11.500
• PCIe to M.2 Adapter with PoE Function HAT+ (B) for Raspberry Pi 5 – Supports NVMe Drives (2230/2242/2260/2280) | IEEE 802.3af/at Power Over Ethernet | Gen2/Gen3 Mode | Bootable SSD Support KWD 13.500
• POE Expansion Board for NVIDIA Jetson Orin Nano/NX Mini Body Saves Even More Space Network Connection and Power Supply Provided for Jetson Orin KWD 9.500
• IMX335 5MP USB Camera (B) for Raspberry Pi 5/Jetson Orin Kit 2K Video Recording 175° Wide Angle Better Sensitivity in Low-Light Condition Wide Dynamic Range USB2.0 Port KWD 20
• Stack HAT Raspberry pi I/O Expansion Shield Onboard 5 Sets 2x20 Connector to Directly Connect Multiple Expansion Functional Boards KWD 8.500
• Official 27W USB Type-C Power Supply for Raspberry Pi 5 White Color 1.2m Cable Length KWD 9.500
• PCIe to M.2 Adapter (E) with Cooling Fan for Raspberry Pi 5 Compatible with M.2 NVMe SSD 2230 2242, Gen2 and Gen3 Modes Onboard Dual LED Indicators Fits Raspberry Pi 5 NVMe KWD 8.500
• 2-CH UART to Ethernet Converter Module Fits Raspberry Pi/Arduino/STM32 Serial Port Bi-Direction Transparent Transmission Between UART and Ethernet, ETH to UART KWD 7
• RP2350 MCU Board with 1.28inch Round LCD 240×240 Pixels 65K Colorful IPS Display Dual-core & Dual-Architecture Design KWD 10.500
• 4.2inch E-Ink Display Module for Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH 400x300 Resolution Black White Two Color SPI Interface Support Partial Refresh KWD 14
• 3.3V SN65HVD230 CAN Board Kit Connecting MCUs to CAN Network ESD Protection Onboard CAN Transceiver Compatible with PCA82C250 Communication Development Module KWD 4
• 4-Ch USB 3.2 Gen1 HUB for Windows, macOS, Linux and Android Metal Case with Wall-Mount Support USB 3.2/2.0/1.1 No Need Driver Plug-and-Play KWD 11
• BME680 Environmental Sensor for Raspberry Pi/Raspberry Pi Pico/Arduino/ESP32, Supports Temperature/Humidity/Barometric Pressure/VOC Gas Detection, I2C and SPI 3.3V/5V Level KWD 7.500
• Galvanic Isolation Rail Mounted TTL to RS232 Converter Bi-Directional Conversion RS232 to TTL Serial Port Adapter, Full-Duplex Communication, Lightningproof and Surge Protection KWD 7.500
• PCIe to 4-Ch USB3.2 Gen1 Board (C) Compatible with Raspberry Pi 5 PCIe to USB Adapater Up to 5Gbps Transmission Speed 2PIN or 33PIN Connector for Power Supply No Driver Required Plug and Play KWD 10
• Aluminum Heatsink with Integrated Cooling Fan Fully Compatible Jetson Nano TX2 NX Module KWD 11.500
• Iiunius Official Active Cooler for Raspberry Pi 5 Combines Aluminium Heatsink with Temperature-Controlled Blower Fan KWD 7
• RGB Full-Color LED Matrix Panel Display for Raspberry Pi Pico ESP32 for Arduino 64×32 Pixels 2048 RGB LEDs Adjustable Brightness KWD 13.500
• 64x64 RGB LED Matrix Panel Full Color for Raspberry Pi/Ardui 192x192 mm 3mm Pitch 4096 LEDs Adjustable Brightness KWD 15.500