Uninterruptible Power Supply (UPS) Module for Raspberry Pi/Jetson Nano Supports Charging and Power Output at The Same Time 3S & 5V 5A Output
KWD 13
2-Channel Isolated CAN Bus Expansion HAT for Raspberry Pi 5/4B/3B/2B/Zero/Zero W/Zero WH/Jetson Nano 2-CH CAN HAT+ Stackable Design for Expanding Multiple CAN Channel
KWD 12
MiniPCIe Adapter HAT+ for Raspberry Pi 5, PCIe to MiniPCIe Expansion Board, Supports Wire-Less NIC, USB Bluetooth, Plug and Play Module, No Need Driver
KWD 7
WM8960 Audio HAT Module for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Hi-Fi Sound Card HAT Stereo CODEC Playing and Recording I2S Interfac Stereo 3D Surrounding
KWD 11
Mono Camera for Raspberry Pi 4B/3B+/3A+/Zero/Zero 2 W and CM3/3+/4, Global Shutter, 110FOV, 1MP
KWD 14
PoE HAT (H) for Raspberry Pi 5 / CM 5 | 5V 5A Power Over Ethernet | IEEE 802.3af/at Compliant | Isolated SMPS | Compatible with Official Case & Cooler
KWD 13
7.5inch E-Ink Display HAT for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH and Jetson Nano no/Ard/Nucleo 800x480 Pixel Black White Two-Color SPI Interface E-Paper Screen LCD
KWD 26
2.7inch E-Ink Display HAT for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH and Jetson Nano 264x176 Pixel Black White Two-Color 3.3V/5V E-Paper Screen LCD SPI Interface Support Partial Refresh
KWD 9.500
for Raspberry Pi RS485 CAN HAT (B) Isolated 2-Ch RS485 1-Ch CAN SPI Communication On-Board SC16IS752 and SP3485 Chips with MCP2515 Controller CAN Transceiver Multiple Protections
KWD 10.500
PoE M.2 E Key HAT+ for Raspberry Pi 5, PCIe to M.2 E Key Adapter with PoE, Supports NGFF (M.2 E Key) Wireless NIC, USB Bluetooth, SMA Antenna, 16-Pin PCIe & 40-Pin GPIO, 5V/12V Output
KWD 13.500
LCD1602 I2C Module 16x2, Green Backlight Adjustable 3.3V/5V I2C LCD Display for Arduino, Raspberry Pi, ESP32, Jetson Nano (32 Characters, SN3193 Driver)
KWD 7
LCD1602 I2C Display Module with Backlight, 16x2 Blue Character LCD for Raspberry Pi, Arduino, ESP32, 3.3V/5V Compatible (32 Characters, I2C Interface)
KWD 7
LCD1602 I2C Module 16x2, Gray Backlight Adjustable 3.3V/5V I2C LCD Display for Arduino, Raspberry Pi, ESP32, Jetson Nano (32 Characters, SN3193 Driver)
KWD 7
10pcs MG-90S 12g Metal Gear Micro Servo Upgraded SG90 Digital Micro Servos for RC Airplane Model Car Helicopter Robot Diving Equipment Racing Model
KWD 12.500
BME688 Environmental Sensor for Raspberry Pi/Raspberry Pi Pico/Arduino/ESP32, Supports Temperature/Humidity/Barometric Pressure/VOC Gas Detection/AI Function, I2C and SPI with AI Function
KWD 11.500
PCIe to M.2 Adapter with PoE Function HAT+ (B) for Raspberry Pi 5 – Supports NVMe Drives (2230/2242/2260/2280) | IEEE 802.3af/at Power Over Ethernet | Gen2/Gen3 Mode | Bootable SSD Support
KWD 13.500
POE Expansion Board for NVIDIA Jetson Orin Nano/NX Mini Body Saves Even More Space Network Connection and Power Supply Provided for Jetson Orin
KWD 9.500
IMX335 5MP USB Camera (B) for Raspberry Pi 5/Jetson Orin Kit 2K Video Recording 175° Wide Angle Better Sensitivity in Low-Light Condition Wide Dynamic Range USB2.0 Port
KWD 20
Stack HAT Raspberry pi I/O Expansion Shield Onboard 5 Sets 2x20 Connector to Directly Connect Multiple Expansion Functional Boards
KWD 8.500
Official 27W USB Type-C Power Supply for Raspberry Pi 5 White Color 1.2m Cable Length
KWD 9.500
PCIe to M.2 Adapter (E) with Cooling Fan for Raspberry Pi 5 Compatible with M.2 NVMe SSD 2230 2242, Gen2 and Gen3 Modes Onboard Dual LED Indicators Fits Raspberry Pi 5 NVMe
KWD 8.500
2-CH UART to Ethernet Converter Module Fits Raspberry Pi/Arduino/STM32 Serial Port Bi-Direction Transparent Transmission Between UART and Ethernet, ETH to UART
KWD 7
RP2350 MCU Board with 1.28inch Round LCD 240×240 Pixels 65K Colorful IPS Display Dual-core & Dual-Architecture Design
KWD 10.500
4.2inch E-Ink Display Module for Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH 400x300 Resolution Black White Two Color SPI Interface Support Partial Refresh
KWD 14
3.3V SN65HVD230 CAN Board Kit Connecting MCUs to CAN Network ESD Protection Onboard CAN Transceiver Compatible with PCA82C250 Communication Development Module
KWD 4
4-Ch USB 3.2 Gen1 HUB for Windows, macOS, Linux and Android Metal Case with Wall-Mount Support USB 3.2/2.0/1.1 No Need Driver Plug-and-Play
KWD 11
BME680 Environmental Sensor for Raspberry Pi/Raspberry Pi Pico/Arduino/ESP32, Supports Temperature/Humidity/Barometric Pressure/VOC Gas Detection, I2C and SPI 3.3V/5V Level
KWD 7.500
Galvanic Isolation Rail Mounted TTL to RS232 Converter Bi-Directional Conversion RS232 to TTL Serial Port Adapter, Full-Duplex Communication, Lightningproof and Surge Protection
KWD 7.500
PCIe to 4-Ch USB3.2 Gen1 Board (C) Compatible with Raspberry Pi 5 PCIe to USB Adapater Up to 5Gbps Transmission Speed 2PIN or 33PIN Connector for Power Supply No Driver Required Plug and Play
KWD 10
Aluminum Heatsink with Integrated Cooling Fan Fully Compatible Jetson Nano TX2 NX Module
KWD 11.500
Iiunius Official Active Cooler for Raspberry Pi 5 Combines Aluminium Heatsink with Temperature-Controlled Blower Fan
KWD 7
RGB Full-Color LED Matrix Panel Display for Raspberry Pi Pico ESP32 for Arduino 64×32 Pixels 2048 RGB LEDs Adjustable Brightness
KWD 13.500