- Shopping, made easy.
- /
- Get the app!
SparkFun RTK Surveying Kit GNSS Receiver: ZED-F9P Transceiver: ESP32 WROOM GNSS L1/L2 Multi-Band Antenna - TOP106 USB A to C Cable and Wall Charger
KWD 199.500
SparkFun Qwiic OLED Display (0.91 in., 128x32)
KWD 4.500
SparkFun SAMD21 Mini Breakout
KWD 12
-20%
Wide Band 4G LTE Internal LoRa Antenna - Wide Band, 700-2700Mhz frequency range, 4G LTE antenna provides a wide enough range for a number of applications including BLE & LoRa/RF-53mm x 24mm
KWD 2
SparkFun FTDI Basic Breakout - 3.3V Development Tool with USB Mini-B Connector Save Space and Money in Your DIY Electronics Projects Pinout of This Board Matches The FTDI Cable
KWD 7
SparkFun Pulsed Radar Breakout - A111-60GHz Radar - Single-chip Solution for pulsed Coherent Radar (PCR) - Integrated Antenna - SPI Interface Capable of Clock speeds of up to 50MHz
KWD 25
SparkFun Qwiic Cable Kit Hook Up I2C Qwiic Development Boards in no time No Soldering Required Includes 10 Different Lengths Styles Breadboardable Polarized 4-pin JST Connector Daisy Chain-able
KWD 5.500
SparkFun USB to RS-485 Converter, Fully Equipped with SP3485 RS-485 transceiver and FT232RL USB UART IC -7V to +12V Common-Mode Input Voltage Range. Board Dimensions: 1.55x0.9 inches
KWD 9
SparkFun RedBoard Qwiic ATMega328P compatible with Arduino board w/ Qwiic Connector and CH340C Serial-USB Converter IC Breadboardable R3 footprint microcontroller Improved reset button
KWD 9
SparkFun Thing Plus - ESP32 WROOM (USB-C) - ESP32-D0WDQ6 Chip Integrated RGB Status LED Operating Voltage: 3.3V Board Dimensions: 2.3in x 1.0in x 0.5in
KWD 10.500
SparkFun Qwiic HAT for Raspberry Pi -Connect I2C sensors & accessories to a standard 2x20 GPIO header Pi Tin compatible 4 Qwiic connectors Daisy chain sensors & accessories Useful GPIO pins broken out
KWD 3.500
SparkFun Thing Plus - SAMD51 Development Board Powerful microcontroller with Qwiic Connect System and Integrated Regulated LiPo Charger No Soldering Required
KWD 9.500
SparkFun Qwiic Compatible with Micro:bit Breakout (with Headers)- Expands The Capabilities Compatible with Micro:bit- Fits Edge Connector- Broken Out 21 GPIO pins to Mail headers- 2X Qwiic Connectors
KWD 4.500
SparkFun Qwiic Single Relay-Up to 5.5A at 240VAC Multiple I2C addresses Available Turn on/Off high Power Device from Low Power microcontroller No Soldering Large Power Loads w/Simple I2C Commands
KWD 6
SparkFun Qwiic MultiPort Add I2C ports via Qwiic connectors to boards that only have one I2C port on their I2C bus Alternative daisy chained configuration 2x mounting holes Board size 1 inch by 1 inch
KWD 3
SparkFun Qwiic OpenLog Open-source datalogging Board Works over I2C Supports microSD FAT16/32 cards up to 32GB Configurable baud rates up to 115200bps Preprogrammed ATmega328 with Optiboot bootloader
KWD 8
SparkFun Qwiic Pro Micro - USB-C (ATmega32U4) - Compatible with Arduino development board 5V/16MHz microcontroller AP2112 3.3V Voltage Regulator Castellated PTH pin pads Reset button Maximum 6V input
KWD 9
SparkFun OpenLog Open-source data logger works over a simple serial connection Supports microSD FAT16/32 cards up to 32GB Configurable baud rates up to 115200bps Preprogrammed ATmega328 and bootloader
KWD 7
SparkFun Pro Mini ATmega328-5V/16MHz Development board Compatible with Arduino boards and IDE
KWD 4.500
LilyPad LED White (5pcs)
KWD 2.500
SparkFun Qwiic Mux Breakout - 8 Channel (TCA9548A) - Easily Read Multiple sensors with The Same I2C Address Or Communicate with Multiple I2C Devices with Different addresses - Board only
KWD 5.500
SparkFun XBee Explorer Dongle - Red
KWD 13.500
SparkFun Qwiic Shield Compatible with Arduino Nano-connect the I2C bus (GND, 3.3V, SDA and SCL) to four Qwiic connectors (two horizontally and two vertically mounted)-daisy chaining-Soldering Required
KWD 3.500
SparkFun LTE GNSS Breakout - SARA-R5 - Includes 1x Breakout and 1x Hologram eUICC SIM Card Secure Cloud LTE-M Data Communication for Multi-Regional use - Local Provider Must Offer LTE-M Coverage
KWD 53
SparkFun MicroMod ATP Carrier Board-Modular interface ecosystem-Connect microcontroller/processor board to various carrier board peripherals
KWD 8.500
SparkFun FTDI Basic Breakout - 5V Development Tool with USB Mini-B connector
KWD 7
Alchitry Ft Element Board - Prototyping Periphery for The Alchitry Au and Au+ FPGA Development Boards
KWD 14
SparkFun RTK Facet L-Band ESP32 WROOM ZED-F9P GNSS Receiver NEO-D9S L-Band Receiver USB Wall Charger - 5V, 2A Dimensions: 136mm x 146mm x 80mm (5.35in x 5.74in x 3.14in)
KWD 511
SparkFun Qwiic HAT for Raspberry Pi
KWD 4
SparkFun Qwiic dToF Imager - TMF8820-5000mm Detection Range - Direct time-of-Flight Sensor - Single Modular Package with an associated VCSEL - Based on Single Photon Avalanche Photodiode
KWD 6
SparkFun Thing Plus - ESP32-S2 WROOM -No Bluetooth- Highly-integrated Feather form-factor development board Equipped w/a 2.4 GHz WiFi System-on-Chip (SoC)- Transparent external flash & RAM encryption
KWD 9
SparkFun GPS-RTK Board - NEO-M8P-2 (Qwiic) High-Accuracy breakout No Soldering Required Breadboardable Contains a Rechargeable backup battery allowing a Warm-start decreasing time-to-first-fix
KWD 96.500
