Spec:Item Type: DC to DC Boost Converter Module
Material: Die Cast Aluminum, Resin
Input Voltage: 12V24V (9-30V)
Output Current: 10A
Output Voltage: 48V
Output Power: 480W
Operating Temperature: -20°C to 80°C
Proof Level: IP67

Package List:
1 x DC to DC Boost Converter Module

Note:
1. In order to ensure the normal of the converter within the input voltage range, the input voltage must not be lower than the minimum or maximum input value limited by the product. The input voltage must be higher than the output voltage value by at least 2V. If there is no 2V voltage difference, the output value will decrease, but will not damage the converter. 2. The input current must be greater than or equal to the power required by the output load equipment (e.g. if the power of the load equipment is 100W, then the input power must be greater than or equal to 100W). During the use of the converter, the current of the load equipment must not exceed the maximum current value that the converter can bear. Leave some margin for the converter as much as possible to ensure the normal and achieve the highest conversion efficiency.
3. The positive and negative poles of the converter must not be reversed during use, as reversing may damage the converter. It is recommended to add a suitable at the input terminal for use.
4. When there is no load, the chip works in light load mode, and the output voltage may vary within a certain range.