A hand-made stick personalized module compatible with Victrix Pro BFG controller by Epidnon, and a t2.0 screwdriver was included.
The customized module increases the tension of right stick (about 170G), the tactile switch is easy to press and feels good to press. In particular, it has a shorter response time, which is an essential feature for FPS professional gamers. it is ideal for the aiming of FPS /TPS games such as Call of Duty, Apex Legends, Fortnite, ect.
Improve module issues such as drift by replacing existing module on the R stick.
Easily installation. Unscrew the screws of faceplate and stick module PCB board with attached T2.0 driver; Replace the stock module with Epindon FPS module.【Attention : 】please insert and remove connector pins of left stick module slowly.
Calibration is requested when the left stick was installed. Calibration method: Press the L( R )stick and function button at the same time, the function button LED will flash. At that time, turn the L(/ R) stick left (counterclockwise) and right (clockwise) 3 times each. Then press the function button again, the white LED will turns off to complete the module Calibration.【TIPS:】Place the controller on a flat, horizontal direction to ensure accurate calibration. it may be necessary to recalibrate for several times.
【TIPS】: Always place the VICTRIX PRO BFG controller on a flat, level surface when performing reset/calibration. Multiple reset attempts may be required.

Product Including:
● Epindon stick module 1Unit(R stick)
● T2.0 screwdriver
●attached stickers for right stick

مرحبًا،

بحث