【PRODUCT NAME】Fakra Z male to female 12V radio antenna amplifier signal booster.
【BASIC PARAMETERS】Connector types: Fakra Z male; Fakra Z female | Color : Black | Cable length: 45cm | Outer packing size: 18*10*3cm | Signal input: Fakra Z male | Signal output (FM): Fakra Z female.
【TECHNICAL PARAMETERS】Frequency range: 88-108MHz 170-240MHz | Gain during amplification: 22±3dB | Output negative reactance: 50Ω | Standing wave ratio: ≤2 | Noise figure: ≤2dB | Maximum output level: 108dBµv | Working voltage: DC+12~24V | Working current: ≤50mA.
【NOTE】1. This antenna splitter has a signal amplifier. Do not connect the antenna that contains the signal amplifier, as this may cause signal interference;2. The antenna amplifier is used to amplify the car radio signal. If your radio does not receive the signal, you may not receive the signal after connecting the antenna.
【PACKAGE】1 x FM/AM car antenna signal booster | Weight: 63.4g.
وصف
Product name:
POBADY FM/AM car antenna signal amplifier booster
Fakra Z male to female connector 12V radio antenna
Basic parameters:
1.The color of this paragraph: black
2.Cable length: 45cm
3.Outer packing size: 20*12*25cm
4.Package:1 x FM/AM car antenna signal amplifier (Weight: 63.4g)
Features:
1.Adopt low insertion loss special IC design, plug in the straight-through state;
2.Support AM/FM and digital radio signal amplification function, but the receiving AM signal is unstable;
3.Signal input: Fakra Z male;Signal output: Fakra Z female
4.The product has a magnetic ring that can filter
Note:
1. This antenna splitter has a signal amplifier. Do not connect the antenna that contains the signal amplifier, as this may cause signal interference; 2. The antenna amplifier is used to amplify the car radio signal. If your radio does not receive the signal, you may not receive the signal after connecting the antenna.