Kantronics Terminal Node Control Sil~con labs CP2102 USB RS232 Serial to DB25 Male Communication Data Cable ST-25M
Material: P/VC Outer Jacket
Cable: 26AWG*5C, OD4.0
Conductor Wire: bare copper
Color: Black
Chipset: Sil~con labs CP2102
TY>pe: USB RS232 Level
Length: 1.0M, 1.8M, 300cm optional, other length can be customized
Connector: Nickel plated shell, plated contacts
Pinout wiring: 2-TXD, 3-RXD, 4-RTS, 5-CTS, 7-GND
Application: for following Kantronics & AEA Timeware TNCs
KAM All KAM KAM98, KPC-3, KPC-3 Plus, KPC-9612, KPC-9612 Plus
PK-232, PK-232MBX, PK-232/PS, PK-900, PK-96, PK-12
Molding: P/VC material, complaint
Support: 7 8 10 Linux
Testing: 3 times electrical inspection, appearance inspection
Package: PE Bag
About CP2102
Single-Chip USB to UART Data Transfer
- Integrated USB transceiver; no external resistors required
- Integrated clock; no external crystal required
- Internal 1024-byte programmable ROM for vendor ID, product ID, serial number, power descriptor, release number, and product description strings
- EEPROM (CP2102)
- EPROM (One-time programmable) (CP2109)
- On-chip power-on reset circuit
- On-chip voltage regulator
- 3.3 V output (CP2102)
- 3.45 V output (CP2109)
- pin and software compatible with CP2101
USB Function Controller
- USB Specification 2.0 compliant; full-speed (12 Mbps)
- USB suspend states supported via SUSPEND pins
Asynchronous Serial Data BUS (UART)
- All handshaking and modem interface signals
- Data formats supported:
- Data bits: 5, 6, 7, and 8
- Stop bits: 1, 1.5, and 2
- Parity: odd, even, mark, space, no parity
- Baud rates: 300 bps to 1 Mbps
- 576 Byte receive buffer; 640 byte transmit buffer
- Hardware or X-On/X-Off handshaking supported
- Event character support
- Line break transmission
Virtual COM Port Device Drivers
- Works with existing