Description:
Hantouch launched touch control board to meet latest Restriction of Hazardous Substances (RoHS) Directive.
This touch panel controller provides the optimistic performance of your analog resistive touch panels for 4-wire models.
It communicates with PC system directly through USB connector.
You can see how superior the design is in sensitivity accuracy and friendly operation.
USB Controller
Dimension Size: 71mm x 20mm x 10mm
Power Requirements D.C.+5V (100mA typical,50mV peak to peak maximum ripple and noise)
Operating Temperature 0 to 50°C
Storage Temperature -40 to 80°C
Relative Humidity 95% at 60°C
Interface USB 1.1 & 2.0
Resolution 2048×2048 resolution
Report rate USB Model: Max. 160 points/sec
Response time Max. 20 ms
Attached Cable 6' shielded cable with USB-A connector for USB port
Regulatory Approvals FCC-B , CE, Unaffected by EMI from other nearly and other display devices
EMI Unaffected by environmental EMI
Panel resistance 4 wire resistive model: 200 ~ 900 ohm
MTBF 200,000 hrs
PIN1: Y- PIN2: X- PIN3: Y+ PIN4: X+

Packing list :
1× 4-Wire USB Controller Card
1× USB Cable
1× Converter Cable