Extend the motherboard's mSATA slot to 7PIN connector. This adapter board simply connects the from the MSATA connector to the 7PIN connector, so the adapter card does not need driven. If the hard disk can not be recognized, please check if it's MINI interface, the card is basically not faulty, please know. This card supports half-height and full-height. If you want to use half-height, just cut it along the V-CUT line in the middle of the PCB.

Specifications:
Product Name: mSATA to Adapter
Product Model: MPCE1ST-N03
Product Package: Electrostatic Bag
Product Interface: MSATA 7PIN
Support System: For WinXP/Vista/Win7/Win8 32-bit/64-bit or higher
Size: Approx. 5*3*0.5cm/1.97*1.18*0.20in

Package List:
1 * mSATA to Card
1 * Screws Bag

Note:
This adapter board simply connects the from the MSATA connector to the 7PIN connector, so the adapter card does not need driven. If the hard disk can not be recognized, please check if it's MINI interface, the card is basically not faulty, please know. This card supports half-height and full-height. If you want to use half-height, just cut it along the V-CUT line in the middle of the PCB.
Because the 1 interface of DN2800MT motherboard share the same with its MSATA slot, sp it does not fit with this adapter card.