EPINDON TMR electromagnetic stick module متوافقة مع وحدات التحكم في Victrix Pro BFG | مفتاح اللمس | المطاط الموصل غير مطلوب | كلا الإصدار PS5 و Xbox | 2 pack 80g
Fix Stick Drift & Conductive Rubber issues. The left or right stick modules of the Victrix Pro BFG controllers can be replaced if drift or conductive rubber failure occurs.No conductive rubber is required – eliminates wear-related issues permanently.
Next-Gen TMR Electromagnetic Module. the TMR stick module for increased durability. In addition, the tactile switch is easy to press and feels good to press. In particular, it has a shorter response time, which is an essential feature for FPS professional gamers.
Easily installation. Unscrew the screws of faceplate and stick module PCB board with attached T2.0 driver; Replace the stock module with Epindon TMR hall effect electromagnetic modules.【Attention : 】please insert and remove connector pins of left stick module slowly.
Calibration is required after installation. Calibration method: Press the L( R )stick and function button at the same time, the function button LED will flash. At that time, turn the L(/ R) stick left (counterclockwise) and right (clockwise) 3 times each. Then press the function button again, the white LED will turns off to complete the module Calibration.
【TIPS】: Always place the VICTRIX PRO BFG controller on a flat, level surface when performing reset/calibration. Multiple reset attempts may be required.
وصف
Product Including:
● Epindon TMR stick module 2-PACK
● T2.0 screwdriver*1
● the orange component and spring for left stick
● attached stickers for right stick
● installation instructions*1