Hardware Parameters
Master Chip: Rockchip RK3588 (8nm LP process)
CPU
8-core 64-bit processor
4 Cortex-A76 and 4 Cortex-A55 with independent NEON coprocessor
Cortex-A76 at 2.4GHz, Cortex-A55 at 1.8GHz
GPU
Integrated ARM Mali-G610
Built-in 3D GPU
Fully compatible with OpenGL ES1.1/2.0/3.2, OpenCL 2.2 and Vulkan 1.2.
NPU:Embedded NPU supports INT4/INT8/INT16/FP16 hybrid computing with up to 6TOPS.
PMU:RK806-1
RAM:LPDDR5 496PIN:4GB、8GB、16GB optional
Memory
eMMC Flash Sockets(default)
Onboard eMMC(customizable)
Note: Either eMMC socket or on-board eMMC, support: 32GB, 64GB, 128GB, 256GB optional
QSPI Nor FLASH: 16MB
MicroSD card slot
M.2 M-KEY slot: Support NVMe SSD (PCIe 3.0 4Lane)
USB:2*USB3.0;2*USB2.0;
Video
1*HDMl 2.1 out up to 8k@60FPS & 1*HDMl 2.0 in up to 4k@60FPS
1* MIPI DSI TX 4 Lane
Camera
2* MIPI CSI 4 Lane
1* MIPI D-PHY RX 4 Lane
Audio
CODEC:ES8388
1* Audio 3.5mm jack with mic
1*MIC In
1*HDMI 2.1 eARC
Ethernet: 1*PCIe 2.5G LAN(RTL8125BG )
Wi-Fi+BT Module
Onboard Wi-Fi 6E+BT 5.3/BLE module: AP6611
Wi-Fi interface: SDIO3.0
BT interface: UART/PCM
Expansion Port
Dual-row pin: 2.54mm 40Pin
Supports DC 5V and 3.3V power output
Configurable UART, PWM, I2C, SPI, CAN, GPIO and other functional interfaces.
Button:1* BOOT key, 1 * On/Off key
Power Source: Supports Type-C power supply, 5V @ 5A
LED: RGB LED Side Illumination
FAN: 5V 2PIN 1.25mm socket
RTC: 3V 2PIN 1.25mm socket
Debugging: Debug serial UART included in 40PIN expansion port
Supported OS: Orangepi OS(Droid)、Orangepi OS(Arch)、Orangepi OS(OH)、Ubuntu、Debian、Android12
Appearance Specification Introduction
PCB
Length: 89mm, Width: 57mm, Thickness: 1.6mm
Weight: 62g