Small Tips for YOU,please read before buying.
*Please Note that This Window Film Only Applies on Smooth Glass Surfaces.Do not Apply to Outside window or Windows with Crack.
*Don't forget to remove transparent backing side before putting on glass or it will not cling(Use a tape on a corner of the back side (the smooth side) to quickly remove the backing protective film).
*Please use a hair dryer to soften the film under cold weather (Heat Resistant up to 176)

Package: One continuous roll (not separate pieces)
Include: Product; Installation tool
We'll package them line with EPE,outer layer of bubble film to protect them.
Some special product will be protected by paper tube.

How to install window film?
1.Clean glass(make sure your glass is clean and smooth).
2.Wet glass(the more water,the better).
3.Cut the film into required size and peel off the transparent backing film.
4.Past the smooth side to glass.
5.Scraper the film from up to down,left to right.
6.Cut the excess film(leave a small gap about 1 cm between the film and window to let water flow out).

Questions & Answers
Q1Why my window film can not cling
A1:Have not wet the window with water, or have not removed the transparent backing film. Please don't forget to remove the protective film or it will not cling.If you have removed the protective side,you may applied the wrong side. Please paste the smooth side to the window.
Q2:Why there are so many bubbles?
A2:Too less water. Please tear it down and spray a lot of water,the more water,the better.
Q3:Why the edge of my window film began to fell off?
A3:The edge of film is too close to the window. Please leave a small gap(about 1 cm )to let the water flow out so that the film can stick well.
Tailor the film to your specific window size or shape. With endless patterns and colors available, create personalized decor that complements your unique style perfectly