الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠.قد تحتاج إلى محول كهرباء
مميزات خاصة
6-Ports Simultaneous Rapid Charger: 6 pack of DeWalt batteries can charge up to 6 batteries at once, with speeds up to 6 times faster than standard chargers. Efficiency meets convenience in this powerful charging solution
Widely Compatible:The 6-Port 20V/60V Rapid Battery Charger is a replacement for the DeWalt 20V/60V Battery Chargers DCB101, DCB102, DCB103, DCB104, DCB107, DCB112, DCB115, DCB118, DCB119, and DCB1800B. It is compatible with a variety of DeWalt 20V/60V Lithium Batteries, including DCB184, DCB180, DCB200, DCB201, DCB203, DCB204, DCB205, DCB206, DCB606, DCB612, DCB606-2, DCB609, DCB609-2, DCB612, DCB615, DCBP034-2, and more
Fast Charging & Safety:It charges almost as quickly as the original, allowing you to fully charge your DCB200 battery in under an hour, keeping your work on track. With built-in protections against overcharging, overheating, over-discharging, short circuits, overcurrent, and overvoltage, it significantly saves you time and enhances your productivity
Excellent Heat Dissipation:Efficient internal cooling system circulates air across the batteries to cool down the heat extending batteries' cycling times for long lifespan
Input Voltage: AC 100~240V, 50~60Hz; Output Voltage and Current: DC 21V (MAX), 4.0A (MAX) With six smart indicators, The LED light indicator is simple but effective, showing you exactly when each battery is fully charged and ready to go
وصف
Item Specification:
6-Ports Sequential Fast Charger
Input: AC100V-240V 50/60Hz
Output: DC21V 4A
LED Light Indicator
Red light: Charging
Green light: Charging is complete
Quick Start: After plugging in the AC power without connecting any battery pack, all 6 channels' LED lights (both red and green) will illuminate briefly for 2 seconds, indicating that the charger is in a ready state.
Intuitive Charging Progress: When connecting multiple battery packs to all 6 channels, the red LED light on the first channel will remain on during the charging process, and the other channels' LED lights will flash red slowly, indicating that they are waiting for charging. When all battery packs are fully charged, all green LED lights will turn on, and red LED lights will turn off.
Safe Charging: If the battery pack is connected to the charger improperly, the LED lights will switch between red and green, and the charging process will stop to ensure safety.
Low Voltage Protection: If the battery pack voltage drops below 13V, the Red light blinking, and the charging process will stop.
Over Voltage Protection: To ensure safe charging, if the battery pack voltage exceeds 21.2V, the charger's green light remains steady.
Red light blinking: battery core temperature is too high! (Please pull out cool for a while and reinsert!)
Charger Overtemperature Protection:
The charger is divided into 3 channels, with each channel capable of charging up to.
a. When charging two battery packs on the same channel:If the charger's NTC temperature reaches a minimum of 90℃, the charger activates overtemperature protection. Charging power for the channel decreases to ≤60W (can drop to as low as 6W).Once the NTC temperature decreases to 80℃, the charging current for each battery pack in the same channel is restored to 2A ± 0.3A (MAX).
b. When charging one battery pack on the same channel:If the charger's NTC temperature reaches a minimum of 90℃, the charger activates overtemperature protection. Charging power for the channel decreases to ≤60W.Once the NTC temperature decreases to 80℃, the charging current for the single battery pack in the channel is restored to 4A ± 0.3A (MAX).
Widely Compatible
Compatible with De-walt 20V / 60V Batteries:
DCB200 / DCB201 / DCB203 / DCB204 / DCB205 / DCB206 / DCB207 / DCB208 / DCB210 / DCB230 / DCB240 Max battery
DCB606 / DCB609 / DCB612 Flex Volt battery 20V/60V
Replacement for De-walt Charger Station:
DCB101 / DCB102 / DCB103 / DCB104 / DCB107 / DCB112 / DCB115 / DCB118 / DCB119 / DCB1112 / DCB1800B / DCB1106 / DWST08050