When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process. Trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses or lines need to be not only long enough, but it must be durable enough, flexible enough and sturdy enough so it won't completely collapse. It must also perform under the constant use and abuse of an everyday workshop environment. PVC (Poly Vinyl Chloride) hose checks all of those boxes and more! Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed. PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won't completely collapse when the dust collector is turned on. The hose has a compression ratio of 3:1. This PVC hose is clear which allows you to see what's going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses. PLEASE NOTE: This hose measures 10 ft however colder temperatures may cause the hose to contract the total length. Typically the hose will measure 10 ft once it is acclimated to room temperature.