مميزات خاصة

CryoNix buildplate only, no magntic base. Upgrade uniform temperature sandblasting surface print bed, no warpage, can be used on both sides. Size: 355x346mm/13.98*13.62in, suitable for H2D combo 3dprinter, no for X1-carbon/X1C/X1E/P1S/P1S/A1 Mini, support room temp cold printing
Support low-temperature printing, it helps to vastly improve print success and save-energy, low temp compatible with PLA/ PETG only, recommended Temperature PLA: 25-45°C, PETG: 35-60°C. High temperature printing is also supported, the maximum surface temperature of 120 ℃, ABS recommended temperature: 80-100 ℃, note: prolonged 90 ℃ above the print may affect the life of plate
Compared with PEI PEY PEO H1H, the PUR coating, in low temperature will show better model adsorption, its first layer adhesion is stronger. No glue stick required. After cooling, model can be easily removed by bending it. No tool
CryoNix heated bed prevent the extruder from clogging the hot end nozzles, eliminating the need for frequent maintenance of the extrusion print head, and are corrosion and impact resistant, with a fine textured surface for a smoother underside of the printed part
How to Clean: Use only water to clean the build surface, no detergent or solvents are needed

وصف

What is box?
1 × 355*346mm cold plate
First layer levelling: After levelling the platform, adjust the distance between the nozzle and the first layer of the hotbed at 0.1-0.2mm to ensure the first layer adheres. first layer adheres
First layer height: It is recommended to set the first layer of model slices at 0.2mm
First layer speed: 10-50mm/s is recommended, the first three layers of ABS, PETG off the blowing cooling fan, PLA off the first layer
First layer temperature: PLA/PETG/ABS can be first room temperature 30-40 ℃ to test your 1.75mm filament, if not, please appropriate temperature or according to the recommended parameters of the consumables, recommended first layer nozzle temperature is greater than the other layer 10 ℃

مرحبًا،

بحث

منصة الطابعة ثلاثية الأبعاد Cryonix 355x346mm لوحة البناء الباردة لـ Bambulab H2D: قابلة للإزالة مزدوجة القابلة للإزالة والمرنة الرمادية الصلب الرمادي - دعم طباعة مؤقتة منخفضة

مميزات خاصة

وصف

منتجات شبيهه