Package Include:
1* Receiver (with cover):
1* Remote Control (with battery, If you need extra remote control, please tell us. ):
:
Item specifics:
Item Type:Switches:
Warranty:1:
Remote Distance:50M Switch Type:Remote Control:
Product Description:
1.Working Voltage: DC12V-72V
2.Current:Standby less than 10mA,Working less than 128mA
3.Working Temperature: -10'C—+60'C
4.Receiver Frequency: 433.92MHZ
5.Receiving Sensitivity: -105dB
6.Output State: Switching Value
7.Max Load:10A Relay, Resistive load less than 8A,Inductive load less than 3A
8.Receiver Board Size:70*50*18mm
9.Case Size:75 * 55 * 30mm
Encoding Type: Learning Code
Add transmitter by the Learning Button on the receiver

Set Control mode
Toggle: 1 Connect ON, 2 Connect ON
Momentary: 1 or 2 is not connected.
Latch: just 1 Connect ON
Toggle ( 1,2 channel )+ Momentary( 3,4 channel ):just 2 connect ON

Momentary-----Press the transmitter button A,the receiver relay A is ON; Release button A ,The receiver relay A is OFF ,The same as B/C/D
Toggle--------Press the transmitter button A For 1 time ,the receiver relay A is ON; Press button A again,The receiver relay A is OFF ,The same as B/C/D
Latched------
Press transmitter button A,the receiver relay A is ON,the relay B/C/D is OFF
.... Press transmitter button D,the receiver relay D is ON,the relay A/B/C is OFF
It mean ,Latched only can keep 1CH ON,and it will ofen have 1CH is ON

Learning Method
Input DC12V Power for the receiver,press the learning button ,Green LED indicator OFF,Then press transmitter ,the LED indicator flash fast,It mean learning successfully.
Clearing Code
Keeping press the learning button 8 seconds until the LED indicator ON, It mean the code have been cleared successfully