Phase Monitoring Relays
Model: mg6a-4t2
Material: metal, aluminum, plastic
Power supply voltage: AC 220V AC110V DC12V DC24V
Rated time range: 0.1s ~ 990h
Pin: 8
Multiple working modes: power on delay, delay release, cycle delay
Working mode selection: long press set / T / R key for more than 3 seconds, and click set key to change working mode.
Time base setting: long press the T / R key for more than 3 seconds to enter, and click the T / R key to change the time specification.
Value setting: click the T / R key to change the single digit, and click the set key to change the ten digit number in the incremental mode.
Confirmation Description: long press set key for more than 3 seconds to confirm the current setting. (do not operate for more than 10 seconds, save settings by default)
Logic Description: in the state (or T1 period), the value is always on, and the decimal point seconds are flashing; in the output state (or T2), the numerical value flashes in seconds, and the decimal point flashes in seconds.
Value setting: click the T / R key to change the single digit, and click the set key to change the ten digit number in the incremental mode.
Multiple working modes: power on delay, delay release, cycle delay
==========
Theory : Time Relay
Contact Load : Low Power
Usage : General Purpose