Product Description
Material: stainless steel
Included Components: Two cat door hinges,one Allen key, eight screws
Product Dimensions: 2.1"D x 1.7"W x 0.4"H
Specific Uses For Product: cat door hinges,dog door hinges,pet door hinges
Installation & Usage Guide for Hinge Set with Screws and Hex Key
Step 1: Cut the Door Corner
1. Locate the side of the door with the handle.
2. Measure and mark the cutting area based on the reference dimensions provided in the product's main image.
3. Carefully cut the marked corner of the door using your preferred cutting tool.
Step 2: Install the Hinge
1. Align the hinge between the cut door corner and the main door section.
2. Secure the hinge in place using the provided screws. Tighten them firmly but avoid over-tightening.
Step 3: Adjust the Hinge Tension
1. Use the included hex key to tighten or loosen the hinge tension screw.
2. Test the movement—the door should stay in place at any angle without wobbling. Adjust gradually until the desired stiffness is achieved.