JAMHER Photocell Sensor for Outdoor Lights Dusk to Dawn Sensor with Automatic Illumination Detection Circuit

Ideal for controlling outdoor area lighting, lighting, rear lights, rear lights, porch lights, terraces, outdoor lights, flood lights, flood lights, entrance lights, driveways, side and lights and more.
When installing the switch, do not install the photosensitive hole in the direction towards artificial or reflected light. This will cause the fixture to turn on and off at night.
Initial Test:
During the initial installation, it takes several minutes for the light-controlled switch to turn off, which is normal.
When testing lights on during the day, cover its photosensitive holes with black tape or other opaque material, and do not cover the switch with your fingers,
as enough light through the gaps of your fingers will make the light-controlled switch work.
The test time is about 2 minutes.

Specification: Rated voltage: 120V AC
Rated frequency: 50/60Hz
Rated load: 1800W Tungsten, 1100VA Ballast
Power consumption: 1.5W Max.
Lighting light: 10~20Lx Turn-On/30~60Lx Turn-Off
Working temperature: -40℃~+70℃
Working humidity: 96%