High and low temperature resistant silicone self-adhesive tape 1in x 10' Scope of application Used for insulation protection in high-voltage environments such as electrician work: copper rows, pipe mother face insulation. Pile head, flexible connection, reactor and other shaped structure insulation protection. It is used for the insulation protection of bare leakage point of power switchgear outlet line, bare leakage point of main busbar of load cabinet, lap joint of copper row of distribution equipment, copper row and terminal of transformer in cabinet, copper row of high voltage cabinet. Insulation sealing protection of intermediate joints and connections in the field of electric power . Insulation sealing protection of insulation layer and shielding layer of large electrical facilities; and insulation protection of exposed metal of power conductors. Sealing protection of overhead line tools ; local insulation reinforcement of overhead lines due to insufficient safety distance. Other related to electricity and waterproof, such as high-speed railroad, ships and other fields. Instructions for use 1. Dust and clean the construction area before use. 2. Tear open the plastic package, remove the self-adhesive silicone insulation tape. 3. Tear off the tape's isolation film, stick a corner of the part that needs to be fit, stretch, and then wrap the self-adhesive tape. Note: When winding the tape for appropriate stretching, the self-adhesive effect will be faster and better. 4. After winding, press the surface hard for 2-3 seconds, until the contact surface with the body is fully adhered without gaps. 5. Self-adhesive tape itself is not sticky, stretching and pressing is to let it give full play to its self-adhesive properties, so as to better adhesive objects.