مميزات خاصة

Compatibility: 264 x 276mm(10.39 x 10.87 inch) spring steel build plate perfect fit for Anycubic Kobra S1, and other FDM printers with a platform size of 264x276mm
Exceptional Adhesion: The build plate surfaces has exceptional adhesion, Excellent adhesion is achieved when the temperature of the heated bed is about 65°C.
Warp Prevention: preventing warping and ensuring stable molding, and the high flatness and elasticity of the spring steel plate facilitate easy removal of printed models.
Built to Withstand High Temperatures: It is resistant up to 200 ℃, ensuring stable printing conditions even for the most demanding prints, compatible with PLA/PETG/PEEK/ABS and other filaments. please use the Quiet Mode when printing the first layer to make sure the first layer is printed correctly. After 4-5 layers, you can switch to other modes.
Before each printing, please clean it thoroughly with isopropyl and wipe it with a lint-free paper towel, to make sure the surface of the steel plate is free from any impurities, especially fingerprints and grease. After each printing, Please let the plate cool down before removing it (room temperature is fine) to avoid damaging the coating.

وصف

Product Name: 3D Printer Build Plate

Size: 264x276mm

Compatibility: for Anycubic Kobra S1 & Kobra S1 Combo, and other FDM printers with a platform size of 264x276mm.

Easy to Remove Models: High-quality spring steel material, after the printing is completed, you only need to take off the spring steel after cooling down and gently bend it to remove the model, without using a shovel, which is more convenient and prolongs the service life of the printing platform.

Easy to Clean: It is recommended to use a non-woven cloth dipped in alcohol to wipe the printing platform. After wiping and cleaning, wipe off the surface moisture as soon as possible to avoid prolonged contact with strong irritating chemicals such as alcohol on the printing surface.

Easy to Install: To use, you only need to tear off the protective sticker on the back of the magnetic base, and then install it on the printer heating platform that is clean and free of foreign objects, let it stand for a while to make the magnetic base firmly fixed on the heating platform, and then install the spring steel on the magnetic base, level the 3d printer and it is ready to use.

Package included:
1 x Spring Steel Sheet 264x276mm

مرحبًا،

بحث

264 × 276 مم لوحة بناء لـ anycubic Kobra S1 & Kobra S1 Combo 3D Printers ، Confetti + Galaxy Good Rempring Steel Feth

مميزات خاصة

وصف

منتجات شبيهه