The "PL775" Series of shackleless padlock ("hockey-puck") hasps are truly one-of-a-kind. Not only do they offer additional security features over the competition, but they offer additional convenience features as well as anti-rust protection never-before seen. Typical hasps like the PL775 are held into place only with three carriage bolts per side. These hasps are easily defeated by grinding off one set of the carriage bolt heads! With PACLOCK's PL775 there is an additional, protected mounting point hidden under the padlock and another mounting point protected by the shroud itself! For convenience as well as cost savings, PACLOCK drilled through holes that match up with tapped holes into the back of our “7-Series” and "9-Series" padlocks. These allow the user to mount the puck to the hasp first, and forever, so that when then hasp is mounted to the gate, the puck never gets removed. To unlock, just turn the key and the cylinder slides down, unlocking the solution. PACLOCK didn't stop there. We not only zinc plated the hasps, but then we did an exterior grade powder coating over top of the nickel plating! Why? Because these hasps will get hit and scraped and dinged. If we only powder coated, then raw steel would be exposed which would lead to rust. If we only zinc plated, then you run into the same issue. But by double-coating, we're doing everything in our power to give you the best, most rust-protected hasp ever available in the retail market. Buy this hasp with a hockey-puck as a kit, just search for “KT7A/775” and pick your colors and keying options! Made in China.