Replacement housing for Reverse Osmosis System,Widely used in RO system or pre-filtration
Fit for 80% ( NOT ALL ) RO systems using standard 2.5" x 10" filters.Matched filter cartridges options, please refer ASIN: B07LC7RXDB | B07LCDDYHQ | B07LCCJ9P5 | B07L9XRCSC | B07LC9G584 | B07BGRLFG4 | B074XCYF93 | B07BGXTY3B via Amazon
INLET-OUTLET-1/4" female threaded, we put matched quick fitting in the box, please use the fittings
Easy to install,Work Temperature:40-120°F/5-50°C ,Work Pressure : 10-60 psi
Pack of 7. 1 x Filter housing , 2 x O rings ,1 x wrench,2 x fittings,1 set screws
Fit with 80% (NOT ALL ) RO systems using STANDARD 10" filters.But different brand,the injection mould is totally different,NOTE:PLEASE REPLACE HEAD AND HOUSING BODY TOGETHER.,IF OTHER BRAND,IT MAY DON'T FIT,if you mind to replace old top head,please replace housing with old brand
If you need 10 inch whole house water filter housing, inlet and outlet should be 3/4 inch ,please refer our other product ASIN B07LCKBKCT | B07LCKLP5K | B09WDBBTZV via Amazon
وصف
Operation Specification:
FEED WATER PRESSURE :35 - 100 PSI
TEMPERATE: 40 - 110°F/5-45°C
PH :3.0 -11.0
MAX TDS 1000 MG/L
TURBIDITY MAX SDI HARDNESS IRON Life time :3 years
Shelf life: 5 years in original sealed package.