1. Smooth surface, can withstand slight wear, hardening treatment can improve work efficiency.
2. Widely used in agricultural equipment, textile machinery, printing machinery, mechanical transmission and other industries that require steering drive.
3. Not easy to deform, high tensile strength, stable performance, large load-bearing capacity, smooth surface and easy maintenance.
Specification:
Name: Spur Gear with Step
Model: 1M (1 Module)
Material: 45# Steel
Surface Treatment: Teeth Hardening + Surface Blackening
Number of Teeth: 60 Teeth
Tooth Pitch: 3.14mm
Outer Diameter: 62mm
Step Diameter: Bore 6-20mm (Step Diameter 40mm); Bore 22-30mm (Step Diameter 50mm)
Tooth Height: 10mm
Total Height: 20mm
Fixing screw: Feeding Machine Screw M6*2
Bore: 6/8/10/12/14/15/16/17/18/19/20/22/24/25/30mm
Bore Tolerance: 0-0.04mm
Shaft Hole: Machining Completed
Note:
1. The contour data described above (in addition to ensuring the accuracy of the inner hole) may vary slightly from batch to batch. No further notice, please refer to the actual subject!
2. The gear material is 45# steel, and the inner holes are all positive tolerance 0-0.04mm. There may be a small number of burrs in stock, which is a normal phenomenon.