[Fitment]:Replacement for Controller V-Sync II ，Compatible with In-Wall Slide-Out on RV.
[Note]: Controller version 13398-DO has replaced the 13398-C2.
[Parameters]: The working voltage is 12V DC input, suitable for a voltage range of 8V DC to 18V DC. Equipped with overcurrent protection (pay attention to electrical safety) and temperature monitoring and other safety functions to protect the motor and controller.
[Function]: Control the operation of the sliding mechanism in RV. Effectively manage the extension and retraction of the sliding part of the vehicle, providing users with smooth and synchronized movement.
[Materials]: The product features high-quality FR-2 copper-clad laminates, upgraded solid capacitors, and high-precision welding processes. It also includes SR waterproof coating, which has excellent insulation, moisture resistance, and leak resistance.

2*LEDs:

One green and one red, used to indicate the current controller status and faults.

Note:

Please confirm whether the model is suitable before buying.

FAULT INDICATION:

GREEN LED:

1BLINK =MOTOR 1

2 BLINKS = MOTOR 2

RED LED:

2 BLINKS=Battery dropout=Battery capacity low enough to drop below 6 volts while running or short in switch wiring.

3 BLINKS=Low battery=Voltage below 8 volts at start of cycle.

4 BLINKS=High battery=Voltage greater than 18 volts.

5 BLINKS=Excessive motor current=High amperage, also indicated by1 side of slide continually stalling.

6 BLINKS=Motor short circuit=Motor or wiring to motor has shorted out.

8 BLINKS=Wire short between controller and motor=Encoder is not providing a signal .This is usually a wiring problem.

9 BLINKS=Hall power short To ground=Power to encoder has been shorted to ground.This is usually a wiring problem.

مرحبًا،

بحث