Vibration Sensors
About this item
The water flow sensor is mainly composed of a stainless steel valve body, a water flow rotor assembly, a steady flow assembly and a Hall element. It is installed at the water inlet end of the water heater to detect the flow rate of the inlet water. When the water passes through the water flow rotor assembly, the magnetic rotor rotates, and the speed changes linearly with the flow rate. The Hall sensor outputs the corresponding pulse signal and feeds it back to the controller. The controller judges the size of the water flow and regulates it.
Technical Specifications
Interface size: 1/2"(DN15), 3/4"(DN20), 1"(DN25), 1-1/4"(DN32), 1-1/2"(DN40), 2"(DN50)
Working voltage range: DC3.5-24V
Material: Stainless steel
Medium temperature: 120
Output pulse high level: >DC 4.5V (input voltage DC 5V).
Output pulse low level: 100M
Flow range: 1/2"(1~25 L/min ± 3%),
3/4"(1~30 L/min ± 3%),
1"(2~50 L/min ± 3%),
1-1/4"(3~60 L/min ± 3%),
1-1/2"(5~150 L/min ± 3%),
2"(10~200 L/min ± 3%),
Flow pulse characteristics: 1/2" F=(18*Q-3)±3%;
3/4" F=(15*Q-3)±3%;
1" F=(8*Q-4)±3%;
1-1/4" F=(1.8*Q)±3%;
1-1/2" F=(0.45*Q)±3%;
2" F=(0.2*Q)±3%; Q = L/Min
Tightness: Close each hole, add 1.7Mpa water pressure test for 1 minute without leakage and deformation.
==========
Hign-concerned Chemical : None
Actuator Mode : Without Manual And Instruction
Structure : Daphragm
Port Size : 1-1/2''(DN40)
Media : Water
Material : STAINLESS STEEL
Temperature of Media : Normal Temperature
Standard or Nonstandard : Standard
Pressure : Low Pressure
Power : AC
Is Smart Device : no
Material : Stainless steel
Output Signal : NPN
Working voltage range : DC3.5~24V
Medium temperature : 120
Water pressure resistance : 1.75MPa
Output pul