Vibration Sensors
Product Description
High-Accuracy Digital Contact Sensor GT2 series GT2-H50 Sensor Head
Detailed Images
SPECIFICATIONS
Model
GT2-H50
Detection system
Quartz glass scale, CMOS image sensor projection system, Absolute type (without tracking error)
Measuring range
50 mm 1.97"
Resolution
0.5 m 0.02 Mil
Indicated accuracy
3.5 µm 0.14 Mil (p-p)*1
Measuring force
Downward mounting
3.2 N*2
Side mounting
2.8 N*2
Upward mounting
2.4 N*2
Sampling cycle
1 ms
Mechanical response
7 Hz*1
Operation indicator light
2-color LED (red, green)
Environmental resistance
Enclosure rating
IP67
Ambient temperature
-10 to +55 °C 14 to 131 °F (No freezing)
Relative humidity
35 to 85 % RH (No condensation)
Vibration resistance
10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Materials
Main body
Main body cast: Zinc die-casting, Indicator: Polyarylate, Dust boot: NBR
Dust boot
NBR
Contact
TYPE304, 440C Stainless steel*3
Sensor head cable
Optional (connect to the M8 connector)
Weight
Approx. 320 g (excluding cable)
*1 Value when the ambient temperature is 20 °C 68 °F.
*2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the
dust boots.
*3 The contact is included with the sensor.
*1 Value when the ambient temperature is 20 °C 68 °F.
*2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the
dust boots.
*3 Make sure the air tube is connected to the air exhaust joint and that no foreign materials enter inside from the joint.
*4 In the case where a mounting bracket D is used with GT2-A32 and GT2-A50, the double amplitude becomes 0.75 mm 0.03".
*5 The contact is inc