Schumann Sine Wave Resonance Generator 7.83Hz Resonance Device
Specifications:
AntennaWaveform: Sinewave
Interface waveform: Sinewave, squarewave, inverted squarewave
Power: USB 5V
Signal voltage amplitude: 3V
Rated power consumption:
Default frequency: 7.83Hz
Adjustment range: 0.001Hz-200KHz
SineSignal voltage amplitude: 3V
SquareWave signal voltage amplitude: 5V
Circuit board size: 150 * 150mm / 5.9 * 5.9in
Package size: 160 x 160 x 30mm
Package weight: 200g
Package Includes:
Schumann wave generator x1
USB cable x1
Touch pen x1
Pin cable x1
Pin cable purpose:
Provides the oscilloscope with direct access to the generator's Schumann-wave signal for waveform verification.
How to use:
Plug the 4-pin connector into the unit's SIGNAL OUTPUT port, then clip the color-coded alligator leads to the scope's probe tips (GND to ground, SIG to the input).
Notes:
Screen-off (power-save): After 2 minutes of inactivity, the screen turns off, but the frequency continues to run.
Screen-on: Tap the power key once to wake the screen; the FREQ (Hz) display shows the current value and the red “=” icon indicates active output.
Power-up check: If the unit were off, a single press would do nothing; a 3-second long-press is required to start it from shutdown.
