Brand:CC3D
Material: TPU
Shore hardness: 57D
Product material type: Silk TPU Flexible Filament
Diameter: 1.75mm
Net weight: 1kg
Packing size: 21*21*7CM

Print Settings:
Printing Temperature:
Low speed machine 215±10°C,
High speed machine 225±10°C
Printing speed:
The low-speed machine is 60-90mm/s, and the printing speed of the exterior wall is not less than 50mm/s.
The high-speed machine is 60-250mm/s, and the printing speed of the exterior wall is not less than 40mm/s.
Fan: 100%
Hot bed temperature: not open or 40-50°C

Notes:
1. The filament is not suitable for the remote filament feeding machine because it is relatively soft, and the gap between the filament feeding gear and the lower throat is too large, and the filament will not be able to go down to the nozzle.
2. The filament is more suitable for medium and high-speed printing, if the printing speed is too low, the silk effect will be worse.
3. Keep in a cool, dry place. After opening, if not in use, put it back in seal and store it in time.