The upgrade 3d lights bar set is for Flashfoge Adventuer regular 5M/ 5M Pro printing project, can directly replace for the led when the original one is broken
We have designed a mounting bracket to install the required print parts STL, please refer to the picture or Thingivess-e search: 5M pro light board bracket. This kit comes with two light boards and spare magnts and connecting cables, you can connect them in series to get a brighter ad5m environment
Voltage: 24V, Current: 0.2A, Power: about 4.8W, 7pcs cold white light lamp chips, led light length approx. 23mm/9.06in, with two 8.5mm mounting holes, power cable lenght 71.5cm/28.15in for connecting led and PCB control board(Connecting the LED yellow port on the motherboard), connector: XH2.54-2pin, supply power, plug and play
Good modification allows better viewing of the hotend extruder print head from camera, 0.4mm brass nozzle or 3d printings part, operation of the printer, replacement of 1.75mm filament, etc
Easy to assemble and install: For standard ad5m non-Pro edition, we recommend that you install the light bar on machine both sides, magntically fastened. For 5m pro, you can mount it on the front panel or the side panel, screw or magntically fastened, please tidy up the wiring sequence, you can slide the extruder print head to see if it will hit the light bar during the installation process, and adjust the mounting position appropriately to avoid x/y calibrations affected
وصف
What the box?
2pcs ad5m led light panels
4pcs mounts magnts
2pcs connection cables
Compatibility: As a light to light up the Regular 5M / 5M Pro, if the interface of the lightbar is compatible, it is also suitable for other printers. We have not tested the compatibility of the AD5X
Stabilised constant current light can create a comfortable and even healthy spatial light sense for AD5M, to give the inside printer more light
Regular 5M doesn't have the port for lighting control, you need to use a separate switch outside the touch-screen to control the power supply or completely power the printer down
ايمدينوجو قطعة غيار ملحقات الطابعة ثلاثية الأبعاد: وحدة تحكم لوحة محول الطارد - X1 إلى Z مع كابل شريط FPC 20 دبوس لا ينحني ينطبق على Artileri Sidewinde X1 Bczamd
KWD 5
-8%
Imdinnogo ملحقات الطابعة ثلاثية الأبعاد مجموعة أدوات تعديل أداة التشطيب تنظيف إبرة Scarper: قطعة واحدة من حديد اللحام مع 8 قطع رأس تشذيب نحاسية قطعة واحدة موصل Bczamd
KWD 12
Imdinnogo أحدث طابعة ثلاثية الأبعاد نمط الطارد المباشر للأجزاء الأساسية طقم تروس بديل رائع لمشغل DIY مباشرة معظم الطارد متوافق مع Trianglb BM Tev Tornd Ender 3 CR10 CR10S TL-D3 Pro
KWD 8.500
ملحقات الطابعة ثلاثية الأبعاد رأس ضغط صامولة تذوب بالحرارة بتصميم قطعة واحدة (6 قطع): قابلة للتبديل مع طرف مكواة لحام قياسي 936 للمكسرات M2 (M2.5) M3 M4 M5 M6 (1/4 بوصة) BCZAMD
KWD 3.500
