Fiber Optic Attenuators
40G optical fiber module QSFP+ ER4 40km with 4 CWDM optical signals LC
Description
The 40G ER4 is a transceiver module designed for 40km optical communication applications. The design is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data. The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G694.2. It contains a duplex LC connector for the Hilinktech 40Gb/s 40km QSFP+ Transceiver Pluggable, Duplex LC Connector, Single mode 2 optical interface and a 38-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module.
Features
4 CWDM lanes MUX/DEMUX design
Up to 11.2Gbps per channel bandwidth
Aggregate bandwidth of > 40Gbps
Duplex LC connector
Compliant with 40G Ethernet IEEE802.3ba and 40GBASE-ER4 Standard
QSFP compliant
APD photo-detector
Up to 40 km transmission
Compliant with QDR/DDR data rates
Single +3.3V power supply operating
Built-in digital diagnostic functions
Temperature range 0°C to 70°C
Compliant Part
Applications
Rack to rack
Data Center
QDR, DDR and SDR
40G Ethernet
Real picture
Transceiver Block Diagram
Mechanical Dimensions