Cables
30-65ml/min Peristaltic Pump KPST 24V Double Tubing
Easy to Replacement with 4 Rotors Norprene Tubing
Basic Parameters
Basic Parameters
KPST Peristaltic Pump Stepper motor
Voltage
24V
Flow ml/min
30-65ml/min
Power(Max)
20W
Weight
A: 365g B:375g C:430g
Control method
Driver board: Modbus / 2802 / KMD-42B-P+2802
Tubing
Imported Norprene(N):1000H
Size
52.4x75.1x78.4mm(including motor and connectors)
Motor lifetime
6000H
Noise
35dB(Less than 60dB measured at a distance of 50cm)
Reference flow rate (in ml/min)
Tube size
N14
N19
ID x OD
1.6mmx4.8mm
1/16in×3/16in
2.4mmx5.6mm
3/32in×7/32in
Rotating speed
300rpm
300rpm
Type A(Screwing)
30 ml/min
65ml/min
Type B(Clamps)
30 ml/min
/
Type C(Double tubes)
30 ml/min(Single tube)
65 ml/min(Single tube)
Driver board
Modbus-RTU
Built-in and external potentiometer speed control, MODBUS RS485 communication and 0-10V analogue speed control are possible. MODBUS RS485 communication and 0-10V analogue speed control, electric and trigger start/stop mode, subdivision up to Maximum 32, drive current can be set (0.7A, 1.2A, 1.7A, 2.2A, 2.7A). 2.2A, 2.7A, 2.9A, 3.2A, 4.0A)
Pulse generation boards
2802
Highly integrated, highly reliable; small size, rich interfaces and easy layout; 485 communication support, physical address setting function, up to 15 extensions; maximum pulse frequency up to 160K, wider application range; forward and reverse control; two start-stop control, expandable foot switch and other peripherals.
Pulse generation boards
+Driver board
2802+KMD-42B-P
Support for clockwise and anti-clockwise operation, LED 4-digit digital display tube display, various control modes: rotary encoder, foot-operated external analogue, 485 communication control
Supplementary instructions
The above parameters were mea