Transformers
1pcs 10W 3.5K Single-ended Output for 6P3P 6L6 EL34 Vacuum Tube Amplifier
Note:When testing the machine, the output must be connected to a speaker or resistor as a load. No-load testing can easily burn the .
Parameters:Core size: 22MM*44MM
Winding method: 3+2 (primary divided into 3 sections, secondary divided into 2 sections)
Inductance: L >= 25H (test frequency is 100HZ, Z11 sheet, 3.5K)
Primary current: 80MA
Primary wire diameter: 0.17MM
Core material: Z11 0.35MM thick insulation annealed sheet, stacked thickness 44MM. The edges of Z11 silicon steel sheet and H50 annealed sheet are black, and we did not do black paint treatment.
Shielding method: painted iron edge cover
Weight: 1.3KG
Volume: 68MM width * 58MM height * 80MM thickness, installation hole center point distance: 80MM (horizontal installation)
68MM height * 66MM width * 80MM thickness, installation foot center distance: 60MM * 44MM (vertical installation)
Bandwidth: 20HZ-26KHZ -3DB
Special note:The uses a Z11 silicon steel sheet with a gray insulating coating on the surface, low temperature rise, high magnetic flux, and a larger inductance than white and black sheets at the same volume, and the low frequency dive of the cow is deeper. The performance of Z11 sheet is better than any H18, H50 cold-rolled sheet or annealed sheet.
==========
Hign-concerned Chemical : None
Model Number : 10W 3.5K
Maximum Power Per Channel : NO POWER