Product Dimensions: The shower threshold water dam measures 39 inches (L) x 0.47 inches (W) x 0.78 inches (H) with a 90-degree angle on the bottom edge and firmly taped to stop water well. It can be installed on the edge of kitchen and bathroom sink countertops to prevent water from running onto the floor
High-Quality Silicone: Our shower threshold water dam is made of high-quality soft silicone material, durable, safe and reliable, corrosion-resistant, high temperature-resistant, wear-resistant, odorless, smooth surface, easy to wipe, save kitchen cleaning time, easy to disassemble, no glue residue
Strong Adhesion: The sticky adhesive strip on The shower threshold water dam will stick to virtually any smooth surface, including walls, doors, floors, tiles and more. Can be used on flat or sloping curbs or the bottom of shower doors to help water flow back into the shower. Covers gaps between bathtubs and walls to avoid moisture.1mm thick adhesive that sticks better than regular caulking tape
Easy to Install: The shower threshold water dam is very soft and can be easily cut to the desired length, clean and dry the surface, measure and cut the desired length of the water barrier, peel off the red adhesive paper and stick it. Then fill the edges of the sealing strip with caulk to ensure its firmness
Multipurpose: The shower threshold water dam is suitable for window sills, kitchen sinks, sealing stoves, countertops, and caulking the edges of the sealing strip to ensure that it stays strong and avoids stains and debris in the gaps
وصف
Installation Precautions
1.The shower threshold water dam Cannot bend freely. Can only be installed in a straight line
2.At the corners, cut at a 45-degree angle
3.After receiving the shower water dam strip product, please put it on the floor for 24 hours to restore it to its original state
4.Please wait 24 hours after installation before use. Do not touch water
How To Use
1.Wipe off the water and dust on the ground
2.Easure the size, determine the location, and mark the ground with a pen
3.Emove the adhesive and install the sill at the marked location
4.Eal the rubber strip so that the end of the waterproof strip is in contact with the wall
5.Pread the glue evenly on both sides of the sill