Plug Valves
Pneumatic angle seat single acting spring return pneumatic valves use compressed air to open the piston valve and close the valve via a spring built into the pneumatic actuator. Industrial pneumatic valves are used to control the opening and closing of valves for air, gas, liquid, water, steam and other media. Pneumatic piston angle seat valves are characterized by the fact that the valve can operate at very high temperatures, high viscosity media and is less sensitive to dirt particles and debris.
Series pneumatic angle seat valve specifications:
Valve type: two normally closed
Using medium: air, gas, liquid, water, steam, oil, vacuum
Operating mode: Pneumatic single acting (spring return)
Actuator working pressure: 100 PSI
Actuator operating pressure range: 65 - 120 PSI
Main body material: 316 stainless steel/CF8M
Actuator material: CF8
Sealing material: polytetrafluoroethylene (PTFE)
Valve seat material: polytetrafluoroethylene (PTFE)
Control medium: inert air, air
Working Pressure: Vacuum to 240 PSI
Maximum viscosity: 600 mm2/s (600 centistokes)
Media temperature: -20 to 180 °C (-5 to 350 °F)
Ambient temperature: -20 to 60 °C (-5 to 140 °F)
Installation direction: any position
Port size: 1/2" NPT female port standard
Mounting Hardware: 1 piece Tube 1/4" OD X Thread 1/8" Male Straight Connector Accessory