Sika Remover-208 Solvent-based cleaning agent for strongly contaminated non-porous surfaces Sika Remover-208 is a solvent-based colorless clear cleaning agent for painted substrates. It is also used to remove traces of Sikaflex products. Removes heavy contaminats Suitable for most painted surfaces and plastics Usage Sika Remover-208 is used to pre-clean strongly contaminated non-porous substrates. Sika Remover-208 can be used to clean painted surfaces prior to bonding. Sika Remover-208 can also be used to remove uncured excess of Sikaflex adhesive or sealant from application tools or soiled surfaces. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility. Removal of uncured material Remove the bulk of the Sikaflex residue with a knife or spatula. Moisten a rag or towel with Sika Remover-208 and wipe off the remaining adhesive or sealant. Surface Cleaning Wipe painted surfaces with a moistened rag or towel with Sika Remover-208. Wet the paper towel with solvent by pouring the liquid onto the cloth. Never dip the paper towel into the Sika Remover-208 as it may contaminate it! Wipe the surface with the wetted paper towel. Use fresh paper towels regularly in order to retain the cleansing power. Before the solvent dries on the surface (evaporates), wipe it off with a clean, dry, lint-free paper towel. Repeat the last two steps until no contaminants show up on a white paper towel. Do not use on sensitive surfaces such as fresh paints. Tightly reseal container immediately after each use. Product Details Typical Product Data Chemical base Solvent-based Color (CQP001-1) Colorless, clear Application temperature 5 ─ 40 °C (41 ─ 104 °F) Application method Wipe-on, wipe-off with lint-free paper towel Shelf life 24 months A Corporate Quality Procedure A) stored in sealed container in up-right position in a dry place at ≤ 25 °C (77 °F)